Our Products
Our Products
For optimal performance of the engine, it is suggested to run the genset / generator at loads in excess of 25%
GENERATOR SET SPECIFICATIONS |
|
Model | C500D5P |
Duty | Prime |
Prime Power Rating kVA | 500/400 |
No. of Phases | 3 phase |
Output Voltage and Frequency | 415 V, 50 Hz / 60Hz |
Power Factor | 0.8 (lagging) |
Current (A) | 695 |
RPM | 1500 |
ENGINE SPECIFICATIONS |
|
Make | Cummins |
Model | KTAA19-G10 |
MoEF Certified Power (hp) | 587 |
Required Power for Rated kVA (hp) | 587 |
Cooling | Liquid Cooled (EG Compleat 50:50) |
Aspiration | Turbocharged, Charge air Cooled |
No. of cylinders | 6, In-line |
Bore(mm) x Stroke(mm) | 159 x 159 |
Compression ratio | 16.7:1 |
Displacement(litre) | 19 |
Fuel | High Speed Diesel |
Fuel consumption @75% load with radiator and fan*(litre/hr) | 81.59 |
Fuel consumption @100% load with radiator and fan*(litre/hr) | 106.28 |
Performance class of genset | ISO 8528-5 G2 |
Starting system | 24 V DC Electrical |
Lube oil specification | 177 ltrs |
Lube oil sump capacity, High-Low level (litre) | 38-32 |
Total lubrication system capacity (litre) | 50 |
Lube oil consumption @ full load** (litre/hr) | 0.15 |
Total coolant capacity (litre) | 85 |
Exhaust pipe size (inch) | 10 |
Total wet weight (Engine+Radiator) (Kg)## | 2300 |
Length x Width x Height (Engine) (mm) | 1598 x 987 x 1242 |
Mean piston speed (m/s) | 7.95 |
Combustion air intake @100% load (±5%) (cfm) | 1278 |
Exhaust Temperature (°C) Alternator specification | 464 |
ALTERNATOR SPECIFICATIONS |
|
Make | Stamford (CGT) |
Alternator frame | HCI544D |
Enclosure | IP 23 |
Voltage regulation (Max.) | ±1% |
Class of Insulation | H Class |
Winding Pitch | 2-Mar |
Stator Winding | Double layer lap |
Rotor | Dynamically balanced |
Waveform distortion/ Total Harmonic Distortion | No load < 1.5 %, Non distorting balanced linear load < 5 % |
Maximum Unbalanced Load across phases# | less than or equal to 25% |
Telephonic Harmonic factor | < 2% |