Our Products
Tell us what you need &
Start today
1000 KVA
1) Turbo-charged & after-cooled industrial diesel engine with
superior efficiency and fuel economy.
2) Integral vibration isolation eliminates the need for
under-unit vibration spring isolators .
1000 KVA is a Three Phase generator with four cylinders. This advanced in-cylinder technology is designed for better
power generating capacity. Rated Output Capacity of the unit is 1000 KVA and Displacement CC is 3000. The machine
utilizes diesel as fuel and is fitted with a large Fuel Tank of 110 Litres.
1000 KVA Generator Specifications
For optimal performance of the engine, it is suggested to run the genset / generator at loads in excess of 25%
- Fuel Type: Diesel
- Cylinders: 4
- Phase: Three Phase
- Power Rating Range: 125
- Fuel Tank Capacity Range: 110 Litres
- Weight Range: 1470
- And Many More…
1000kVA SET SPECIFICATIONS / CUMMINS DG SET ON RENT |
|
| Model | CP1010 D5 P |
| Prime Power Rating kVA | 1010 |
| Output Voltage and Frequency | 415 Volts, 50 Hz |
| Power Factor | 0.8 (lag) |
| No. of phases | 3 phase |
ENGINE SPECIFICATIONS |
|
| Make | Cummins |
| Model | KTA 38 G5 |
| No. of cylinders | 12 ‘Vee” |
| Aspiration | Turbocharged-Aftercooled |
| Bore x Stroke | 159 mm x 159 mm |
| Displacement | 37.8 ltrs |
| Output - Prime | 1180 bhp (880 kWm) |
| Fuel consumption @ 75% load with Radiator & Fan | 153.3 ltr/hr |
| Fuel consumption @ 100% load | 203.8 ltr/hr |
| Typical oil consumption @ 100% load | 0.24 ltr/hr |
| Total wet weight ( engine + radiator) | 6000 kg |
| Length x Width x Height (engine) | 2265 x 1400 x 1658 mm |
| Compression Ratio | 13.9 : 1 |
| Piston Speed | 7.95 m/s |
| Governor / Class | Electronic / A1 |
| Lubricating oil sytem capacity | 145 ltrs |
| Coolant capacity (engine + radiator) | 260 ltrs |
| Combustion air intake @ 100% load (+/- 5%) | 66.9 m3/min |
| Fan air flow across radiator | 1431.3 m3/min |
| Exhaust Temperature | 500 oC |
ALTERNATOR SPECIFICATIONS |
|
| Make | Stamford |
| Frame size / Model No. | HC6Y |
| Voltage Regulation | 0.50% |
| Insulation | Class H |
| Standard Enclosure | IP 23 |
| Winding Pitch | 2 / 3 Pitch |
| Stator Winding | Double layer lap |
| Rotor | Dynamically balanced |
| Wave form distortion | No load < 1.8 %, non distorting balanced linear load < 5 % |
| Telephone Interference Factor | Better than 50 |
| Total Harmonic Factor | Better than 2% |