Our Products
Tell us what you need &
Start today
1250 KVA
1) Turbo-charged & after-cooled industrial diesel engine with
superior efficiency and fuel economy.
2) Integral vibration isolation eliminates the need for
under-unit vibration spring isolators .
1250 KVA is a Three Phase generator with four cylinders. This advanced in-cylinder technology is designed for better
power generating capacity. Rated Output Capacity of the unit is 1250 KVA and Displacement CC is 3000. The machine
utilizes diesel as fuel and is fitted with a large Fuel Tank of 110 Litres.
1250 KVA Generator Specifications
For optimal performance of the engine, it is suggested to run the genset / generator at loads in excess of 25%
- Fuel Type: Diesel
- Cylinders: 4
- Phase: Three Phase
- Power Rating Range: 125
- Fuel Tank Capacity Range: 110 Litres
- Weight Range: 1470
- And Many More…
1250kVA - 1500kVA GENERATOR SET SPECIFICATIONS / GENERATOR ON RENT |
||
| Model | C32 | |
| Prime Power Rating kVA | 1250 | |
| Output Voltage and Frequency | 415 Volts, 50 Hz | |
| Power Factor | 0.8 (lag) | |
| No. of phases | 3 phase | |
ENGINE SPECIFICATIONS |
||
| Make | CAT | |
| Model | KTA 50 G3 | |
| No. of cylinders | 16 ‘Vee’ | |
| Aspiration | Turbocharged-Aftercooled | |
| Bore x Stroke | 159 mm x 159 mm | |
| Displacement | 50.3 ltrs | |
| Output - Prime | 1470 bhp (1097 kWm) | |
| Fuel consumption @ 75% load with Radiator & Fan | 190.8 ltr/hr | |
| Fuel consumption @ 100% load | 251.8 ltr/hr | |
| Typical oil consumption @ 100% load | 0.3 ltr/hr | |
| Total wet weight ( engine + radiator) | 6824 kg | |
| Length x Width x Height (engine) | 2978 x 2080 x 1780 mm | |
| Compression Ratio | 13.9 : 1 | |
| Piston Speed | 7.95 m/s | |
| Governor / Class | Electronic / A1 | |
| Lubricating oil sytem capacity | 177 ltrs | |
| Coolant capacity (engine + radiator) | 440 ltrs | |
| Combustion air intake @ 100% load (+/- 5%) | 81.6 m3/min | |
| Fan air flow across radiator | 27357 ltrs/sec | |
| Exhaust Temperature | 529 oC | |
ALTERNATOR SPECIFICATIONS |
||
| Make | Stamford | |
| Frame size / Model No. | HCK6Z | |
| Voltage Regulation | 0.50% | |
| Insulation | Class H | |
| Standard Enclosure | IP 23 | |
| Winding Pitch | 2 / 3 Pitch | |
| Stator Winding | Double layer lap | |
| Rotor | Dynamically balanced | |
| Wave form distortion | No load < 1.8 %, non distorting balanced linear load < 5 % |
|
| Telephone Interference Factor | Better than 50 | |
| Total Harmonic Factor | Better than 2% | |